Your wishlist is empty
SOM-SL STM32MP157
Triple processor power integrated - graphics, communication and real-time control in a single chip
By the three cores of the 2x Arm® Cortex®-A7 and the 1x Arm® Cortex®-M4 processors’ in one chip, the module – with dimensions of only 1 inch x 1 inch (25.4 x 25.4 mm) – achieves maximum performance in terms of visualization and computing power. In addition, it offers extensive interfaces that are predestined for applications in industry, automation, medical technology, POS/POI applications as well as IoT and Industry 4.0. Its compact design is ideally suited for a wide range of baseboard designs. Kontron has already provided a corresponding evaluation board in the 4.3-inch form factor as a reference design.
The STM32MP157A processor from STMicroelectronics offers sufficient computing and graphics power for demanding visualization and Internet communication applications as well as for control tasks within mechanical engineering and equipment technology. Based on a pre-installed embedded Linux operating system, the Arm® Cortex®-A7 Dual Core handles complex visualization tasks, including the display of web content. In this context, touch displays and wireless technologies are also supported, as they are mainly used in IoT solutions. The integrated Cortex-M4 offers proven microcontroller technology with a multitude of interfaces for industrial measuring and control technology.
The System-on-Module based on the STM32MP157A processor provides a powerful, compact and cost-effective basis for individual board designs. As it is a solderable module, the costs for connectors on the SoM module and the baseboard below are omitted. The module’s long-term availability is provided for a period of ten years.
The Kontron SoM with the STM32MP157A processor is equipped with 512 MB DDR3 RAM (optional 256 MB), 2 MB NOR-Flash and 512 MB NAND-Flash (optional 256 MB) as standard. It has one 10/100 Mbit/s Ethernet port, one USB 2.0 Host port, one USB 2.0 OTG port, up to 3 UART ports and one CAN 2.0 port. Numerous digital and analog I/Os as well as PWM and two Secure Digital Input Output (SDIO) interfaces make the SoM ideal for industrial use. A Display Serial Interface (DSI) port and an RGB interface are available for connecting displays.
Power is supplied via a 3.3 volt connection ±5%. The application range is from -40°C to +85°C.
- CPU: SL STM32MP157A (2x Arm® Cortex®-A7 @650 MHz, 1x Arm® Cortex®-M4 @200 MHz, 3D GPU)
- Speicher:
- DDR3-RAM: 512 MByte
- NAND-Flash: 512 MByte
- NOR-Flash: 2 MByte
- Ethernet: 1x 10/100 Mbit/s, PHY included
- USB: 1x 2.0 Host, 1x 2.0 OTG
- CAN: 1x CAN 2.0
- I/O: 3x UART, 2x I2C, 19x GPIO, 2x PWM, 2x ADC
- SDIO: 2x SDIO, 4.0 bit
- LCD Interface: 1x MIPI DSI, 1x RGB 24 bit bis zu 1366 x 768 @60fps
- Spannungsversorgung: 3,3 V ± 5 %
- Stromverbrauch: max. < 1,25 W
- Temperatur: -40 °C .. +85 °C
- Betriebssystem: Embedded Linux (Yocto Distribution)
- Formfaktor: 25,5 x 25,5 mm
- Footprint: 88 Pin CASTELLATIONS, 38 LGA Pads
- Interne RTC: auf SoM mit Quartz
- Sicherheit: TrustZone, AES 256, SHA-256, MD5, HMAC, 3x Tamper Pins mit 1 aktiv, Secure RAMs, Secure Peripherals, Secure RTC, Analog true RNG, 98-bit unique ID
Kontron is a global leader in embedded computing technology and a sought-after consultant for the realization of business models and applications tailored to the Internet of Things. Thanks to its extensive portfolio of hardware, software and service solutions, Kontron achieves the optimum for the respective customer applications. This allows them to focus fully on their core competencies.
Kontron and its R&D staff are developing many of the standards that are driving the world of embedded computing platforms forward. These pioneering technologies and applications not only enable new business models, but also change and enrich the lives of millions of people. The result is faster time-to-market, lower total cost of ownership, long-term availability, and holistically optimized applications based on leading, highly reliable embedded technology.
