Search website:
Wishlist

Your wishlist is empty

2SC0535T2A1-33

Dual-Channel SCALE-2 Driver Core for 3.3 kV IGBTs

The 2SC0535T2 SCALE-2 dual-driver core combines compactness with broad applicability and cost efficiency. It is designed for high-reliability industrial and traction and drives all usual high-voltage IGBT modules up to 3300 V. Its embedded paralleling capability allows simple inverter design at higher power ratings. Multi-level topologies with 1700 V IGBTs with higher isolation requirements can also be easily supported. 

Advantages of the Technology

The 2SC0535T is the most compact driver core in its voltage and power range, featuring a footprint of only 76.5 x 59.2 mm and an insertion height of 26 mm. The SCALE-2 chipset reduces the component count by up to 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs. The 2SC0535T combines a complete two-channel driver core with all components required for driving, such as short-circuit protection, Advanced Active Clamping, an isolated DC/DC converter as well as supply voltage monitoring. Each of the two output channels is electrically-isolated from the primary side and the other secondary channel.  An output current of 35 A and 5 W drive power is available per channel, making the 2SC0535T a suitable choice for both high-power modules and parallel-connected IGBT modules. In dedicated IGBT mode, the driver provides a gate voltage swing of +15 V / –10V. The turn-on voltage is regulated to maintain a stable 15 V regardless of the output power level. Moreover, the temperature range has been widened to cover low temperature applications down to -55 °C. Excellent EMC performance allows safe and reliable operation in even harsh industrial conditions. The 2SC0535T driver has a creepage path of 44 mm and is suited for high-voltage IGBTs with blocking voltages up to 3.3 kV. The driver is UL-compliant and features clearance and creepage distances that enable it to meet pollution degree 2 and overvoltage category 2 according to EN-50178 and EN-50124. Therefore, the driver is an excellent choice for all traction and industrial applications. The 100%-tested, partial discharge-free transformer design guarantees safe operation over the expected lifetime. 

Driving Parallel-Connected IGBTs

The driver allows direct parallel connection of any number of IGBT modules with individual drivers. This new, pioneering concept makes it practical for the first time to build a converter series with discrete modules as well as parallel-connected IGBTs without any additional development effort.

Do you have questions about our products?
Please let us know.
HY-LINE Technology GmbH
+49 89 614 503 10sales@hy-line.de
  • Blocking voltages up to 3300V
  • 2-level and multilevel topologies
  • Embedded paralleling capability
  • Switching frequency up to 100kHz
  • Very short delay time of <100ns
  • Small jitter of ±2ns
  • Gate current ±35A
  • +15V (regulated)/-10V gate driving
  • Interface for 3.3V...15V logic level
  • Direct and half-bridge modes
  • IGBT short-circuit protection
  • Supply under-voltage lockout
  • Isolated DC/DC converter
  • 2 x 5W output power
  • Operating temperature -55…85°C
  • Safe isolation to EN50178 and EN50124
  • UL compliant
  • Superior EMC
  • Reliable, long service life
Konfiguration:
Dual Channel
Gate-Strom:
35 A
Ausgangsleistg./ Kanal:
5 W
Sperrspannung (max):
3300 V
Steuerspannung am Gate:
+15/-10 V

Power Integrations offers highly integrated IGBT drivers. Based on decades of experience, ASICs have been developed for the driver and monitoring functions, which together with the inductive transformers form the core of the drivers. Extensive application design support is offered.

Highly integrated driver components: cheaper than discrete in-house development

MOSFETs and IGBTs are convenient to drive with low power, unlike bipolar power semiconductors. However, high gate capacitances must be recharged and, in the case of stacked IGBTs for HVDC (high-voltage DC transmission), large potential differences must also be bridged. In addition, there are protection functions for the power semiconductors and a negative bias voltage for IGBTs to be blocked so that they cannot switch through and fail as a result of transients in bridge circuits.

In view of the high voltages, some know-how is required here. For example, special regulations on insulation clearances, clearances and creepage distances, and partial discharge resistance must be observed, and these must also be checked with expensive measuring equipment. Likewise, the degradation of the board substrate and the migration of metal ions in it must be taken into account, which can otherwise lead to premature short circuits and total failures.

Instead of launching costly in-house developments, it makes sense here to use proven, safe driver modules designed using in-house developed, monolithic highly integrated semiconductor components as well as proprietary planar transformers, such as those offered by Power Integrations under the name SCALE (which stands for Scaleable, Compact, All-purpose, Low-cost and Easy-to-use). Power Integrations, previously CONCEPT, has been developing IGBT driver solutions for over 30 years and therefore has unrivaled experience with this topic.

The SCALE devices are driven with standard logic levels from 3.3 to 15 V and are very economical in the IGBT field: they are cheaper and more reliable than conventional discrete circuit designs, especially when it comes to driving high-voltage IGBTs. Thus HY-LINE Power Components offers you everything around inverters and high performance DC/DC converters from one source.

Power Integrations offers both general modules, the SCALE Driver Cores, and modules adapted to specific IGBT modules, the SCALE Plug-and-Play Drivers. In addition, there are the monolithically integrated SCALE iDriver chips.

Base Boards 2BB0535T

SCALE™-2 Base Boards
Fast and cost-effective IGBT-stack design
A plug-and-play solution for 2SC0535T driver cores and high-voltage measurement Fast and efficient development of customized power-stack designs based on driver cores and CONCEPT application know-how. Easy use of 2SC0535T
Blocking voltages up to 3300V
Switching frequency up to 100kHz
Electrical (3.3V...15V logic level) and fiber-optic interfaces
Direct and half-bridge modes
Embedded paralleling capability
2-level and multilevel topologies
IGBT short-circuit protection
Dynamic Advanced Active Clamping (DA2C)
Isolated DC/DC converter
Supply under-voltage lockout
Safe isolation to EN50178 and EN50124
UL compliant
Superior EMC
Reliable, long service life
To help customers reduce design time, CONCEPT has launched a new Base Board for driving 1.7kV, 2.5kV or 3.3kV IGBTs. The 2BB0535T integrates the high-performance gate drive unit into the customer´s power-stack design. It offers a quick way of evaluating the performance of various IGBT modules when used with the 2SC0535T2A0-33 SCALE-2® driver. The user can choose either a cost-effective electrical interface or a high-performance fiber-optic interface. Layout data and schematics – offered free of charge – enable the driver core to be perfectly integrated into the customer´s power stack. The Base Board is suitable to drive almost all available single and dual IGBT modules up to 3.3kV like 190mm x 140mm, 130mm x 140mm IGBT modules and others. The plug-and-play capability makes it ready to operate immediately after mounting. The user needs invest almost no effort in designing or adjusting it to a specific application. Availability
Small volumes for evaluation are available from stock. In low volumes the boards are delivered without driver cores or gate resistors; for order quantities of 1000 or above, gate drivers and resistors can be included.

News & Publications

More information about our products

Newsletter

You can expect technical knowledge & competence
I accept the privacy policy. I agree that my data will be processed within the scope of processing the inquiry.
Contact
+49 89 614 503 10
sales@hy-line.de